2. Attach the Filter Basket Bottom Cap to the Filter Basket by turning clockwise until fastened tightly. Using the
included 2 tablespoon scoop, add approximately 7 scoops of coarse to medium grind coffee into the Filter
Basket.
NEVER exceed 8 scoops.
NEVER overfill or compress coffee.
Leave 1/2 “gap unfilled from top of the rim.
3. Place the Filter Basket Top Cap onto the top of the Filter Basket.
IMPORTANT: Make sure all surfaces are clean of debris especially around the 0-Ring Seal. This will prevent
any leaks or malfunctions during the brewing process.
4. Attach the Filter Basket to the Control Lid by inserting it into the bottom of the Control Lid and turning clockwise
until it is secure and no longer spins.
5. Place the Control Lid, with the attached Filter Basket, on the Carafe. Make sure the Filter Basket is fully
submerged in the water.
To Next Page
Loading...