1. 1. NEVER submerge the Control Lid in water or any other liquid. NEVER place Control Lid in a stream of water
or any other liquid. Doing so will damage the Express Cold Brew, which could lead to personal injury and will
void your warranty.
2. Fill the Cleaning Cup about 2/3 full with clean, fresh water.
3. Inspect the bottom of the Water Pickup Tube to see if any brewing material has been collected on the filter. If
so, gently rinse ONLY the bottom of the Water Pickup Tube to dear any debris.
4. Place the Control Lid onto the Cleaning Cup.
5. Rotate the Control Knob to CLEAN.
To Next Page
Loading...