VINGLI CD0BN4D - Assembly Steps: Final Drawer Assembly; Step 13: Assemble Second Drawer; Step 14: Insert Drawers

STEP 13
A×8
STEP 14
⑳
㉖
E
A1
A1
㉒
㉑
⑳/㉖
E
E
E
D
D
G
㉓
E×8
D×4
G×2
㉔
ASSEMBLY>MANUAL support@vingli.com
ASSEMBLY STEPS
A2
A2
⑳/㉖
⑳/㉖
⑳/㉖
First,screws four bolts(A1) into drawer front board(20),attach drawer side
boards(21)(22) to board(20) by aligning the bolts and cams(A).
Second,insert drawer bottom (24) into grooves. Align groove in drawer back
boards(23) with drawer bottom. Attach drawer back (23) to left and right drawer
boards using four bolts (E).
Then attach drawer handle(G) to drawer using two bolts(D).
Repeat above steps to assemble second drawer with drawer front board(26).
Align inner and outer rollers to insert drawers.
⑮
⑮