Read each step carefully before starting. It is very important that
each step is performed in the correct order. If these steps are not
followed in sequence, assembly difficulties will occur.
Make sure all parts are included. Most board parts are labeled or
stamped on the raw edge.
Work in a spacious area and near where the unit will be used,
preferably on a carpet, or use a piece of the cardboard packaging
to protect your floor and product.
Recommended # of people needed for assembly: 2 (however it
is always better to have an extra hand). Estimated assembly
time is1.5hours.
For a smooth assembly process, we suggest you keep a lite tightness
for all the screws during assembly. After the whole product is
assembled,firmly tighten all the screws.
-Do not allow children to climb on unit
-Serious or fatal crushing injuries can occur from furniture tip-over. To
prevent this furniture from tipping over, it must be permanently fixed to
the wall. Fixing devices for the wall are not included since different wall
materials require different types of fixing devices. Use fixing devices
suitable for the walls in your home. For advice onsuitable fixing systems,
contact your local specialized dealer.
-Avoid sharp objects or corrosive chemicals to prevent damage to the product
-During assembly, keep parts and packaging materials away from children
and petsas there could be potential injury and choking hazards.
To Next Page
Loading...