What to do if compressor won't turn on in Vintage Air 561191 Automobile Accessories?
If the compressor of your Vintage Air Automobile Accessories system isn't turning on while other functions are working, the first step is to inspect the switch, the potentiometer, and their associated wiring for any damage.
How to fix Vintage Air 561191 Automobile Accessories blower staying on high?
If the blower in your Vintage Air Automobile Accessories system remains on high speed when the ignition is on, unplug the 3-wire BSC control connector from the ECU. If the blower shuts off, this indicates that the ECU is either improperly wired or damaged. Replacing the BSC will be necessary, which requires removing the evaporator from the vehicle. No other part replacements should be necessary.
General| Brand | Vintage Air |
|---|---|
| Model | 561191 |
| Category | Automobile Accessories |
| Language | English |
Details on refrigerant type, capacity, and compressor lubricant requirements.
Explains safety switch functions and critical pre-assembly service steps.
Guidance on radio interference capacitors and battery/ground integrity.
Information on preventing voltage spikes and protecting electronic components.
Steps for installing the condenser and its associated components.
Instructions for mounting the compressor using the provided brackets.
Installing defrost ducts and fresh air covers into the dash assembly.
Modifying early model kick panels for proper hose routing and fitment.
Proper procedure for lubricating O-rings for a secure system seal.
Initial steps for routing heater and A/C hoses through prepared caps.
Connecting the drain hose to the evaporator unit and firewall.
Securing the glove box into its designated opening in the dash.
To Next Page
