To Next PageTo Next PageWhat to do if compressor will not turn on in Vintage Air SureFit Automobile Parts?
If the compressor of your Vintage Air Automobile Parts isn't turning on while other functions are working, begin by inspecting the switch, the pot, and their associated wiring for any signs of damage.
How to fix blower that stays on high speed in Vintage Air Automobile Parts?
If the blower of your Vintage Air Automobile Parts remains on high speed when the ignition is on, even though all other functions work, there are a couple of things you can try: * First, unplug the 3-wire BSC control connector from the ECU. If the blower shuts off after doing this, the ECU needs to be replaced. Also, check the BSC wiring to make sure it isn't damaged, improperly wired, or shorted to the vehicle ground. * If the issue persists, you may need to replace the BSC. Note that this requires removing the evaporator from the vehicle.
General| Brand | Vintage Air |
|---|---|
| Model | SureFit |
| Category | Automobile Parts |
| Language | English |
Details on mounting the compressor using specific brackets.
Steps for physically installing the evaporator unit into the vehicle.
