Vinten Vision SD12 - Page 49

49
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.2 Vision SD12 Pan and Tilt Head - Final Assembly
Item Part No. Nomenclature Qty
3364-900SP* Platform slide assembly, comprising:
1 3364-210 Platform slide 1
2 Q300-128 Rubber strip, 1.78 mm dia 2
3 3170-202 Screw (large) 2
4 M005-735* Screw, low-profile, cap head, socket, M4 x 12 mm long 3
5 3364-235 Platform graphic 1
6 3364-236 Serial no. label 1
7 M801-048 Pin, dowel, 5 mm dia. x 12 mm long 1
8 3364-213 Platform 1
9 3321-284 Platform insert 1
10 3321-255 Platform slide clamp strip 1
11 3321-278 Slide clamp screw 1
12 3325-343 Slide clamp screw knob 1
13 M004-804* Screw, grub, dog point, socket head, M3 x 10 mm long 2
14 M806-033 Pin, coiled-spring, 1.5 mm dia. x 12 mm long, mdp 1
15 3364-903SP* Right hand slide plate assembly
16 3364-42 Pan unit assembly (Fig 6.3) 1
17 P200-105 Bearing, ball, radial, 30 mm ID x 42 mm OD x 7 mm long, two
shields
2
18 M701-036 Circlip, external, standard, 30 mm shaft dia. x 1.50 mm thick 1
19 M006-801* Screw, grub, dog point, socket head, M5 x 6 mm long 1
20 P600-009 Roller, needle, 3 mm x 13.8 mm long 1
21 3364-233 Adjustment slide sleeve 1
22 M806-042 Pin, coiled-spring, 2.5 mm dia. x 8 mm long, mdp 1
23 Thrust bearing, comprising:
P602-021 Washer, thrust, bearing, 25 mm ID x 42 mm OD x 1 mm thick 2
P602-020 Bearing, needle roller, thrust, 25 mm ID x 42 mm OD x 2 mm
long, with cage assembly
1
24 3364-19 Balance knob assembly 1
25 L700-001 Spiral retaining ring, internal, single-turn (light-duty) x - in. bore dia.
x - in. thick
1
26 3364-257 Balance graphic 1
27 M004-703* Screw, cap head, socket, M3 x 8 mm long 3