Vinten Vision SD12 - Page 50

50
Contents
Previous
Page
First
Page
Next
Page
Previous
View
28 3364-43 Tilt unit assembly (Fig 6.4) 1
29 M005-718* Screw, cap head, socket, M4 x 12 mm long 2
30 3321-233 Mechanism housing side cover 1
31 M005-721* Screw, cap head, socket, M4 x 25 mm long 2
32 M005-714* Screw, cap head, socket, M4 x 20 mm long 1
33 M005-504* Screw, button head, socket, M4 x 10 mm long 3
34 3364-285 Slide release 1
35 J532-109 Spring, compression, 3/4 in. free length, 5/32 in. hole dia., 4.5 lbf/in.
rate
1
36 M004-503* Screw, button head, socket, M3 x 8 mm long 1
37 3364-284 Top graphic 1
3364-48 Spring assembly (ERAM), comprising:
38 3364-232 Adjustment slide 1
39 N500-023 Bearing, needle roller, radial, full complement, 1/4 in. ID x 7/16
in. OD x 7/16 in. long
1
40 3321-222 Shim washer A/R
41 L801-098 Pin, dowel, oversize, 1/4 in. dia. x 3/4 in. long 1
42 3390-231 Actuator shaft 1
43 3364-908SP* Spring actuator assembly 1
44 3364-287 Sleeve for use with Hanson spring 1
45 3364-331 ERAM compression spring 1
46 3321-223 Buffer 1
47 3364-282 Spring end cap (Hanson spring) 1
48 M007-523* Screw, button head, socket, M6 x 20 mm long
Fig 6.2 Vision SD12 Pan and Tilt Head - Final Assembly (Cont)
Item Part No. Nomenclature Qty