Need help?Do you have a question about the Vinyl Engine Goldring-Lenco GL 75 and is the answer not in the manual?
Guide for mounting a cartridge and setting stylus position using a template.
Steps for balancing the tonearm and setting stylus pressure.
Compensating for side thrust using the anti-skating mechanism.
Steps for setting speed and placing the arm to begin playing a record.
Checking and adjusting turntable speed using the stroboscope.
General| Drive System | Belt Drive |
|---|---|
| Speed Adjustment | Manual |
| Overhang | 15 mm |
| Type | Belt Drive |
| Motor | AC Motor |
| Speeds | 33, 45 rpm |
| Platter | Aluminum |
| Wow and Flutter | 0.1% |
| Tonearm | Static Balanced |
| Cartridge | MM |
To Next Page