EasyManua.ls Logo

VINYL WORKS CANADA SNAP - LOCK SLD User Manual

VINYL WORKS CANADA SNAP - LOCK SLD
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL# SLD "SNAP - LOCK"
IN-POOL DECK LADDER
IMPORTANT INSTRUCTIONS: Read all instructions carefully & completely to become familiar with
parts, assembly, safety and proper use of this product. Failure to follow these instructions
may result in serious personal injury. SWIM RESPONSIBLY & SAFELY !
TOOLS REQUIRED: 7/16" socket, nut driver & wrench, measuring tape, Phillips (star) screwdriver,
1/8" + 1/4" drill bits & drill, pencil or marker, rubber mallet and a hole saw.
SAFETY INSTRUCTIONS & PROPER USE - ASSEMBLY & INSTALLATION
This pool ladder has a 300 lb load capacity - one person - when properly assembled & installed
This pool ladder is designed & intended for use with an above ground pool only and for pool
decks measuring a maximum of 60" high (from the floor of the pool to the floor of the deck)
Your pool has shallow water - absolutely NO DIVING or NO JUMPING into the pool
This product conforms to the latest revisions of the ANSI/APSP/ICC recommended standards
for above ground / on ground swimming pool ladders
For entry & exit of the pool, face ladder at all times. Utilize handrails for safe climbing
Warning: To prevent entrapment or drowning, do not swim through, behind or around ladder
Locate ladder solidly on bottom / floor of pool and free from high traffic areas on your pool
deck. Use of a ladder pad is highly recommended to protect pool liner
Ladder must be secured to pool deck for stability & safety as outlined in this assembly manual
Keep all ladder parts free from obstructions to avoid possible injury. Do not secure any items to
the ladder. Such objects (eg. thermometers, play toys, ropes) may create a potential for
tripping or entrapment
NEVER ALLOW CHILDREN TO SWIM UNATTENDED - Nothing replaces parental supervision
Assemble & install this pool ladder as per the manufacturer’s instructions. Do not deviate from
these instructions
IDENTIFY PARTS
MAKE CERTAIN TO READ ALL INSTRUCTIONS CAREFULLY &
IDENTIFY ALL PARTS BEFORE STARTING THE ASSEMBLY &
INSTALLATION OF THIS POOL LADDER. FOR WARRANTY
INFORMATION PLEASE VISIT OUR WEBSITE. REVIEW SAFETY
INSTRUCTIONS BEFORE USE TO PREVENT INJURY.
FOR ALL REPLACEMENT PARTS VISIT OUR WEBSITE
WWW.VINYLWORKSCANADA.COM
877-VINYL WK
www.vinylworkscanada.com
MODEL # SLD
RIGHT
SUPPORT
LEG
LEFT
SUPPORT
LEG
Identify all parts (ladder & hardware) to make certain you have everything and that they are
free of any damage. Contact manufacturer without delay if something is missing or damaged.
Note: for part identification
and assembly, LEFT & RIGHT
are always determined as if
you are facing the ladder
about to climb.
TREADS
x 6
TREAD
LOCK PINS
BASE
TREAD
x 2
DECK
MOUNT
FLANGE
LEFT
HANDRAIL
RIGHT
HANDRAIL
x 4
Question and Answer IconNeed help?

Do you have a question about the VINYL WORKS CANADA SNAP - LOCK SLD and is the answer not in the manual?

VINYL WORKS CANADA SNAP - LOCK SLD Specifications

General IconGeneral
BrandVINYL WORKS CANADA
ModelSNAP - LOCK SLD
CategoryLadders
LanguageEnglish

Summary

Safety and Usage Guidelines

Critical Safety Instructions

Essential safety warnings for pool ladder use, load limits, and supervision.

Proper Usage and Placement

Guidelines for safe entry/exit, pool area, and preventing entrapment.

Parts Identification

Identify All Ladder Components

Guide to identify all parts and hardware, checking for damage.

Ladder Assembly Steps

Assemble Base Tread

Step-by-step instructions for fitting the base tread onto support legs.

Attach Treads

Guide for attaching the three treads to the support legs securely.

Install Handrails

Instructions for fitting the left and right handrails onto the support legs.

Ladder Installation

Deck Installation Options

Explains three options for installing the ladder based on deck height.

Secure Ladder to Deck

Steps to secure the ladder to the deck using flanges, bolts, and screws.