Power cut-off settings
Please ensure that you have set the parking mode options in
the camera settings before installation. The VIOFO HK3-C
Hardwire kit will power the dash cam in parking mode until
the voltage of your car battery drops to the configured
value or the configured timer expires. (Please set the parking
recording timer using the VIOFO APP.)
Note: Before starting the installation, ｗe suggest that
the Hardwire Kit should be installed by professionals.
The HK3-C Hardwire Kit provides permanent power to the
dashcam for the parking recording function. The ACC
detection function will switch the dash camera into parking
mode automatically when the vehicle engine is shut off and
will resume normal recording when the vehicle engine is
turned back on. The Low Voltage Cut-off function will
protect the car battery from excessive discharge.
Features
HK3-C Hardwire Kit
Battery (+)
(Red)
Ground
(Black)
ACC
(Yellow)
4000mm
3000mm
58mm
USB Type-C
Plug
Battery：Constant power fuse slot
ACC：Switched fuse slot
Ground：Ground point
Adapters Hardwire box
Ferrite Ring Core
Specifications
Total Cable Length: 4 Meters
Input Voltage: 12-24V
Output Connector: USB Type-C Plug, DC 5V2A
Input Interface: ACC (Yellow), Ground (Black), Battery (Red)
Battery Protection Options:
Working temperature: -30°C to 60°C (-22°F to 140°F)
Protection: Low Voltage Protection, Over Current / Surge
Protection, Reverse Polarity Protection
11.8V / 12V / 12.2V / 12.4V
23.6V / 24V / 24.4V / 24.8V
ACC
Accepts Voltage from 12 – 24V
4 Options For Voltage Cut-Off to Prevent Battery Drain
ACC Detection, Automatically Switches Parking Mode
Compatible with: VIOFO A139 Dash Camera
Constant Power Supply
To Next Page
Loading...