Viofo HK3-C Hardwire Kit

Need help?

Do you have a question about the Viofo HK3-C Hardwire Kit and is the answer not in the manual?

Summary

Details the hardwire kit's capability to provide permanent power for parking recording, ACC detection, and low voltage cut-off.

Outlines the technical details including cable length, input voltage, output connector, interfaces, protection options, and working temperature.

Explains how to set parking mode options and the role of the VIOFO APP in managing power cut-off based on battery voltage or timer.

Guides users to find the fuse box location and confirm the fuse type by consulting the car manual.

Provides methods to identify ACC (switched) and Battery (constant) fuses using a tester or ignition switch positions.

Instructs on finding a suitable ground point on the vehicle body using a circuit tester for continuity.

Explains how to use an Add-A-Fuse kit for clean installation, crimping it to the hardwire kit's ACC and BATT connections.

Details connecting ACC, Battery, and Ground wires to the appropriate fuse slots and ground points.

General

Input Voltage	12V - 24V
Output Voltage	5V
Max Output Current	3A
Low Voltage Protection	Yes
Connector Type	Micro USB
Fuse Rating	5A
Compatibility	VIOFO dash cameras
Low Voltage Protection Values	12.0V
Fuse Type	ATO
Features	Low voltage protection