To Next Page

To Previous Page

button to select the function item, press button to adjust/setup,

Power on/off

1. Connect to the power supply with the power cord and turn on the switch.

2. -To turn on the TV

Press POWER button on the TV or remote control.

-To turn off the TV

Press POWER button on the TV or remote control.

Input Source select

Press INPUT button on the TV set or remote control to display input

source menu, and use CH+/- button on the TV set or Ĥ0ĥ!button

on remote control to select the input source, press OK button on the

remote control to enter.

Note: Before you select the input source, make sure the

connections are prepared.

Basic OSD Menu operation

Use /

button to select the main menu, and press button to enter the submenu.

In the submenu, use /

Ĥĥ

or press button to enter the submenu.

* (Press MENU button to return to the upper menu.)

* (Press EXIT button to exit the menu display.)

Note1: Only when you input the suitable signal, the relevant items can be activated

Note2: Please operating the OSD menu according to hint on the bottom of the banner.

Main menu

Picture

Audio

Time

Setup

Lock

Channel

Submenu

(Setup menu

for example)

Hint---you should operate the OSD menu according to the hint.

Press MENU button to display the OSD menu as below:

Basic Operation

Component

HDMI1

HDMI2

HDMI3

VGA

VIORE LC37VF80 User Manual

Questions and Answers: