This document provides assembly instructions and product information for the DALLAS BED LP 90x200, model DALP9010/9014, manufactured by VIPACK FURNITURE.
Function Description
The DALLAS BED LP 90x200 is a children's bed designed for sleeping. It features a house-shaped frame, which adds a decorative and playful element to a child's room. The bed includes a slatted base to support a mattress (mattress not included). The design suggests it is suitable for young children, as indicated by the "0-4" age range symbol in the usage features, although the general warning about children under 3 years old suggests careful consideration for very young users.
Important Technical Specifications
The bed requires assembly, as indicated by the detailed assembly instructions and the list of components. Key components and fasteners include:
- A x14: M6 x 80mm screws
- B x18: Ø8 x 30mm dowels
- C x24: Ø8 x 30mm dowels
- D x2: Ø6 x 100mm screws
- E x4: M6 x 100mm screws
- F x34: Ø4 x 30mm screws
- G x4: Ø6 x 80mm screws
- H x1: Allen key (hex wrench)
The bed frame consists of various wooden parts, numbered 01 through 10 in the assembly diagrams. These include vertical posts (01, 02), horizontal rails (03, 08, 09), angled roof frame pieces (04, 05, 06, 07), and the bed slats (10). The overall dimensions of the bed are 90x200 cm, referring to the mattress size it accommodates. The assembly process is estimated to take 60 minutes with two people.
Usage Features
The DALLAS BED LP 90x200 is designed for use by children.
- Assembly: The bed requires adult assembly. All assembly components must be tightened properly and checked regularly for tightness.
- Safety Warnings:
- Choking Hazard: Small parts and choking hazards are present before and during assembly. Keep children under 3 years old away from the assembly area.
- Falls: The bed is not designed for children under 4 years old to jump on.
- Entrapment: Ensure all parts are correctly assembled to prevent gaps where children could get trapped.
- Weight Distribution: The bed is designed for even weight distribution. Do not allow children to stand or jump on the bed slats.
- Intended Use: The bed is intended for sleeping. It is not designed for rough play or jumping, especially by children under 4 years old.
- Durability: The manufacturer recommends checking and retightening all necessary screws and fittings regularly to ensure the bed remains sturdy and safe. The bed is designed to last for at least 4 years under normal use.
Maintenance Features
Proper care and maintenance are essential to ensure the longevity and appearance of the DALLAS BED LP 90x200.
- Cleaning:
- General Cleaning: Clean the surface using a slightly damp cloth and mild washing liquid if necessary. Do not use any cleaning product containing alcohol or ammonia.
- Polishing: To maintain the shiny surface of the product, furniture polish will also work to clean and dust off the surface.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, solvents, or strong chemical solutions as these can damage the finish.
- Specific Cleaning Guidelines (to avoid damage):
- Microfibre cloths or dirt erasers: These can contain fine abrasive particles which can cause scratches on the surfaces.
- Aggressive chemical substances: These include abrasive cleaning agents or solvents, which may damage the surfaces too.
- Scouring powder, steel wool or scouring pads: These are highly abrasive and will scratch the surfaces.
- Vacuum cleaners: The nozzles and brushes can cause scratches on the surfaces.
- Steam cleaners: The surfaces may be damaged or separated from the ground due to the high pressure and heat of the water vapour.
- Environmental Conditions: Avoid placing the furniture in direct sunlight or near heat sources, as this can cause fading, warping, or cracking of the wood. Maintain a stable room temperature and humidity.
- Regular Checks: Periodically check all screws and fittings and tighten them as needed to ensure the bed remains stable and safe.
To Next Page
Need help?
General
