Need help?Do you have a question about the Viper V730 and is the answer not in the manual?
A wave of light travels across the keyboard. Direction can be changed with arrow keys.
Changes light pattern to radar. Direction controlled by arrow keys.
Light flows from center to sides without backlighting.
Adds backlighting to the entire keyboard with the ribbon of light.
Controls the speed of the ripple effect using FN+PgUp (increase) and FN+PgDn (decrease).
Controls the speed of the sidewinder effect using FN+PgUp (increase) and FN+PgDn (decrease).
Controls the fading speed of the reactive effect using FN+PgUp (increase) and FN+PgDn (decrease).
Controls the speed of the breathe effect using FN+PgUp (increase) and FN+PgDn (decrease).
Holding FN and pressing F11 twice illuminates the entire keyboard.
Adjusts the speed of lighting patterns using FN+PgUp (increase) and FN+PgDn (decrease).
Adjusts LED brightness using FN++ (increase) and FN+- (decrease).
Resets the keyboard to its factory default settings by pressing FN+Pause Break for 3 seconds.
States the device complies with Part 15 of FCC Rules, subject to two conditions.
Warns about unauthorized modifications and co-location of antennas.
To Next Page
General
