Viqua BA-ICE-S User Manual

A3 Alarm
Symptoms:

Audible alarm

A3 is displayed on the controller

Sometimes the screen will switch between displaying a number as well as A3
Solution:
1. Reset day counter (Ensure lamp is replaced first)
a. Unplug power cord for 30 seconds (ensure controller is fully powered down and no longer
making any noise)
b. Hold down the reset button on the side of the controller while the system is powered down
(unplugged)
c. Plug the power cord back into the controller while holding down the reset button
d. Keep holding down the reset button until "rSEt" is displayed on the screen
e. Let go of reset button, the screen should then show 365 and no longer be in alarm
2. If the controller remains in an A3 alarm, check to make sure the reset button is not damaged.
a. The rubber cover on the button may be missing or damaged
b. The button may be broken and the controller may need to be replaced

Viqua BA-ICE-S Specifications

General

Brand	Viqua
Model	BA-ICE-S
Category	Controller
Language	English

Summary

A3 Alarm

Symptoms of A3 Alarm

Identifies audible alarms, 'A3' display on controller, and screen switching between numbers and 'A3'.

Solution: Reset Day Counter

Step-by-step guide to reset the controller by unplugging, holding the reset button, and verifying screen prompts like 'rSEt'.

Troubleshooting Persistent A3 Alarm

Inspects the reset button's rubber cover and physical integrity if the alarm persists after the reset procedure.