Need help?Do you have a question about the VIRDI AC-2200 and is the answer not in the manual?
General| Type | Fingerprint Access Control |
|---|---|
| FAR | 0.001% |
| FRR | 0.1% |
| Operating Voltage | 12V DC |
| CPU | 32-bit |
| Communication | TCP/IP, RS485 |
| Capacity | 10, 000 users |
| Fingerprint Sensor | Optical |
| Fingerprint Verification Time | < 1 sec |
| Fingerprint Capacity | 10, 000 templates |
| RF Card | Mifare |
| Input | Exit Switch, Door Sensor |
| Output | Alarm |
| Power Supply | DC 12V |
| Operating Temperature | -20°C to 60°C |
| Humidity | 20% to 80% (non-condensing) |
Important warnings and precautions for safe operation and installation of the terminal.
Explains button functions, LED signals, and various terminal screen displays.
Details features like network access control, auto sensing, and fingerprint ID.
Illustrates standalone and PC server connection configurations for the terminal.
Outlines basic steps and checks before starting environment configuration.
Explains steps to add new users, including ID entry and authentication type selection.
Describes the process of adding an administrator with elevated privileges.
Details setting the terminal ID and authentication priority for network identification.
Explains how to set the connection method (Static IP or DHCP).
Guides on setting the terminal's IP address.
Explains how to set the server connection method (Static IP or DDNS).
Guides on setting the IP address and port for the network server.
Guides on setting the terminal's operating mode (Access, T&A, Cafeteria) and time zones.
Determines what information (ID, Name, Message) is shown after successful authentication.
Sets the type of door lock connected to the terminal.
Configures an alarm for when the door remains open beyond a set time.
Adjusts the volume level for voice guidance messages.
Sets how the terminal synchronizes its time with the server.
Determines the format for displaying the date on the terminal.
Enables or disables the use of the mobile key feature.
Allows direct locking or unlocking of the terminal without server interaction.
Configures the Monitor 1 input port for external contacts or motor locks.
Covers general system configuration settings, including user ID digit length and language.
Sets the match degree for 1:1 fingerprint authentication.
Initializes terminal settings, excluding MAC and serial numbers.
Configures external device modes like slave reader, anti-passback, and T&A authentication.
Guides on how to use the terminal for access control operations, including authentication modes.
To Next Page