SCOOTER
2
Pull the release lever from the back of the deck
and lift up the seat.
Firmly push the seat latch so that it falls forward.
Then, lower the seat. DO NOT lower the seat latch
from the side. Push from the back as shown.
Hold the Vega™ upright and release the kickstand.
Press the deck button inward and slide it to position 3.
1
4
3
Unlatch the neck clamp. Press the neck button and slide the
deck all the way to the base of the front assembly. Then,
close the neck clamp.
Lift up the footrests and adjust the handlebar as needed.
6
5
7
To Next Page
Loading...
