VIRTUAL ON VO-Z3H - User Manual

3D LED FAN
Model: VO-Z3H
User manual V3.1

Summary

Foreword

Symbol Description

Important Note

Indicates important information or notices related to the product's operation.

Operation and Use Prompts

Provides guidance and tips for operating the device correctly.

Safety Instruction

High Speed Rotation Safety

Ensure device is not touchable or use a protection cover during high speed rotation for personal safety.

Installation Stability

Mount the product firmly to prevent falling and causing injury.

Protective Cover Use

It is recommended to use the factory original protective cover.

LED Blade Installation

Install LED blades correctly to prevent damage.

Splicing Collision Avoidance

When splicing, manually rotate devices to check for collisions and avoid damage.

Abnormal Operation Handling

Stop use immediately in case of collision, abnormal sound, or other issues.

Modification Prohibition

Users must not disassemble, repair, or modify the product to prevent damage.

Product List

Product Introduction

LED Blades

Component labeled as '1' in the product introduction diagram.

LED Blades Fixed Slot

Component labeled as '2' in the product introduction diagram.

TF Card Slot

Component labeled as '3' in the product introduction diagram.

Power Port

Component labeled as '4' in the product introduction diagram.

Product Installation

Drilling 3 Fixing Holes

Procedure for drilling holes for device mounting.

Mount the Bracket

Instructions for attaching the mounting bracket.

Product Installation

Install the Blades

Steps for installing the LED blades onto the device.

Connect the Power Cable

Procedure for connecting the power cable to the device.

Fixed the Host

Securing the device to the bracket to prevent detachment.

Contents Upload

Computer Convert

Guide on converting video files using transcoding software for playback.

Contents Upload

Cell Phone App Convert

Instructions for using the mobile app to manage and convert content.

Contents Upload

PC Version Software

Details on downloading and using the PC software for device management.

Splicing Mode

Bluetooth Audio Function

Remote Control Introduction

Device Icon Introduction

Make 3 D Video

Content Library

More Detailed Operation

Specification

Failure Analysis

Notes

Tear Down or Remould

Prohibits disassembling, repairing, or dropping the product to avoid damage.

Use and Storage Environment

Specifies operating temperature (0°C-70°C) and prohibits high temp, pressure, magnetic field, dust, humidity. Recommends protective cover.

Machine Maintenance

Advise not to scratch device surface with sharp objects; clean with soft dry cloth. Avoid volatile solvents.

WARRANTY CARD

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the VIRTUAL ON 3D LED FAN, model VO-Z3H, a device designed for displaying 3D holographic content. It functions by rapidly rotating LED blades to create a persistent image, giving the illusion of a floating 3D display.

Function Description

The 3D LED Fan is primarily used for displaying holographic 3D visuals. It supports various content formats and offers multiple ways to upload and manage content, including computer conversion, a mobile app, and PC software. The device can operate as a standalone unit or be combined with multiple units for a larger, synchronized display. It also features Bluetooth audio connectivity for synchronized sound playback with video content.

Important Technical Specifications

• Size: 650*650*55mm
• Weight: 0.58KG
• Resolution: 1600*960dpi
• LED Quantity: 4*240
• Viewing Angle: 170°
• Rated Power: 60W
• Voltage: 12V
• Rotating Speed: 700r/min
• Brightness: 4500cd/㎡
• Communication Mode: 2.4G WiFi 802.11b/g/n
• Bluetooth: Yes
• Multi-splicing: Yes
• Brightness Adjust: Yes
• Angle Adjust: Yes
• Remote Control: Multi-function
• Timer On/Off: Yes
• APP On/Off: Yes
• TF Memory: 16GB
• Content Format: MP4, AVI, RMVB, JPG
• Upload Method: TF card/APP/Cloud/Web

Usage Features

Installation: The device requires a firm installation position to prevent falling. It involves drilling three fixing holes on a wall (or directly using self-tapping screws on a board), mounting a bracket, installing the LED blades into their slots (tightening screws gently to protect them), connecting the power cable, and finally fixing the main unit to the bracket with a screw to prevent it from falling. A protective cover is recommended for safety, especially given the high-speed rotation of the blades.

Content Upload and Management: Content can be uploaded via a TF card, a mobile app, or PC software.

• Computer Convert: Video files need to be transcoded using the "XMediaRecode" tool (provided on the TF card) before being copied to the TF card for normal playback. Users should refer to the software user guide for detailed information due to potential upgrades.
• Cell Phone App Convert: A mobile APP ("3D LED FAN") is available for both Android (Google, Huawei, Xiaomi, Vivo, Tencent myapp, Oppo, 360) and Apple (App Store) devices.
  • Connection: Users connect to the device's Wi-Fi hotspot (e.g., Z3H_XXXXXX) using the initial password "12345678" (changing the password after initial setup is recommended).
  • Operation: The app allows for TF card formatting, file operations (rename, delete, playback, import from album), splicing video, splicing angle calibration, connecting to a router, device updates, and settings adjustments.
  • Settings: Users can switch the device on/off, modify Wi-Fi name and password, adjust brightness/angle, Bluetooth volume, and playback mode.
  • Versions: The app supports a "Single version" for individual device control (LAN content change, angle calibration, splicing/synchronization) and a "Network version" for cloud-based remote splicing/synchronization, and cluster management.
• PC Version Software: Downloadable from the virtualongroup website, the "ADMachineSys" software offers similar functionalities:
  • Single Version: Uses the router's LAN for splicing/synchronization, angle calibration, and content replacement without needing a network cable.
  • Network Version: Cloud-server based for remote operations like splicing/synchronization, cluster management, and content replacement.
  • Device Configuration: Allows binding the device to a router, modifying the device hotspot, account binding, and grouping.
  • File Cutting: Essential for splicing multiple devices, enabling settings for rows, columns, paths, and machine models for smart one-click content cutting.

Splicing Mode: Multiple units can be combined to form a larger screen. This can be achieved by naming files "xxx.pj.mp4" for synchronization or by setting up splicing mode via the mobile app or PC software. Devices in the same group play synchronously, but only Group A devices support remote control by default. When splicing, gaskets may be needed for even-numbered devices to prevent collision.

Bluetooth Audio Function: The device can connect to a Bluetooth speaker for sound playback with video content. Users first open the Bluetooth speaker, then the 3D LED FAN. Automatic matching occurs, and sound plays upon successful connection. In splicing mode, slave devices automatically close Bluetooth, with only the host device (named XXX_host.mp4) connecting to Bluetooth. Volume can be adjusted via the mobile app on supported models. Password-free Bluetooth speakers are recommended, and sound quality depends on the audio quality of the content.

Remote Control: A multi-function remote control is included, offering "Turn on," "Turn off," "Previous," "Next," and "Current loop play" options. In splicing mode, only Group A devices respond to the remote control.

Device Icons: The device provides visual indicators for its status:

• Device is connecting router
• Device connect to router success
• Device connect to router failure
• Device is going to reset
• Device can not read the TF card
• There is no content in TF card

Making 3D Video: Clients can create their own 3D videos using the provided APP. A QR code and link are available for a detailed operation guide.

Content Library: A library of 3D content for various industries is available, accessible via a QR code or link.

Maintenance Features

General Notes: The product is made of high-density components and should not be torn down, repaired, refitted, or subjected to hard falls to avoid damage.

Use and Storage Environment:

• Operating Temperature: 0°C to 70°C. Use carefully outside this range.
• Avoid: High temperature, high pressure, strong magnetic fields, dust, and humidity.
• Recommendation: Use with the factory original protective cover.

Machine Maintenance:

• Cleaning: Do not use sharp objects to scratch the device surface. Wipe with a soft, dry cloth if there is dirt, stains, or water droplets.
• Chemicals: Do not use volatile organic solvents like gasoline or alcohol to clean the device surface.

Failure Analysis and Solutions: The manual provides a troubleshooting guide for common issues:

• Cannot boot: Check power line connection and power light.
• Auto reboot: Change to an original power adapter.
• No display:
  • TF card bad contact: Remove, reinsert, and wipe the TF card.
  • Video wrong format: Convert the video before sending to TF card or use the APP.
  • TF card wrong format: Change to an original TF card or format to FAT32 system, then re-download content.
• Abnormal display:
  • LED blades not installed well: Re-install LED blades, ensuring ports fit.
  • TF card wrong memory: Format TF card, then re-download content.
• Light on but non-rotation: Contact service; use TF card for factory reset.
• Vibration/Noisy: LED blades not installed well or bent; re-install LED blades.

Warranty: The product comes with a warranty for free repair under normal use. The warranty is void if the product is physically damaged, installed/maintained/operated against recommendations, or if damage is due to problems unrelated to manufacturing.

VIRTUAL ON VO-Z3H Specifications

General

Brand	VIRTUAL ON
Model	VO-Z3H
Category	Fan
Language	English