Need help?Do you have a question about the Virtue SPIRE III and is the answer not in the manual?
General| Brand | Virtue |
|---|---|
| Model | SPIRE III |
| Category | Paintball equipment |
| Language | English |
Provides immediate steps to start using the Spire III loader by installing batteries and understanding LED indicators.
Lists essential safety precautions for using the Spire III paintball loader, including eye protection and age restrictions.
Detailed steps for installing 3 AA batteries into the Spire III loader, including polarity and securing the tray.
Instructions on how to turn the speaker on or mute it, and how the Spire III confirms sound settings.
Explains the Spire III's G-force sensor, drive mechanism, and how it operates during normal use and when out of paint.
Details the battery types, low battery indication through LED and beeps, and power-saving measures.
Describes the functions of the bottom button: force feed, muting/unmuting speaker, and entering the programming menu.
Information on using Reballs with the Spire III, including recommended settings for reliable feeding.
Procedure to open the Spire III shell by pressing the lock button on the back.
Steps to remove and reinstall the Spire tray from the loader shell, including securing it.
Instructions for removing and installing the lid, speed feed, or other accessories using the quick mount system.
Guide on how to remove and reinstall the Spire Drive, noting its magnetic lock mechanism.
Steps to remove the PCB electronics package by unplugging the motor and detaching tray tabs.
Recommendations for cleaning the Spire III components, including warnings against dishwashers and submerging electronics.
Details how to adjust the speaker alarm for the Reload Indicator, including settings for beep frequency and muting.
Configures the color and timing of LED indicators for reload alerts based on user preference.
Explains how to adjust the G-force sensor sensitivity for optimal performance, cautioning against unnecessary adjustments.
Describes settings to control LED behavior for power saving, including dimming or turning off LEDs.
Instructions for upgrading the loader's firmware using a mobile app, including entering the correct mode.
Guide on how to reset all loader settings to their factory defaults, including the button sequence and LED confirmation.
Troubleshooting steps for when the Spire III loader fails to power on, checking tray seating, batteries, and connections.
Solutions for non-functional LEDs or speakers, suggesting checks of programming settings and factory resets.
Steps to resolve slow or erratic feeding, including battery checks, firmware updates, drive finger condition, and Reball settings.
To Next Page