EN
Virtufit Premium Trampoline with Safety Net
10
ASSEMBLY INSTRUCTIONS
When Attaching springs to the jumping mat, please be careful. You will need another person to help
you with this portion of the assembly. CAREFUL-When attaching the Spring, the Connector Points
can become pinch points since the trampoline is tightening up.
• Lay out the Jumping Mat (A) inside the frame
How to use the Spring Tool (J)
• Take Spring(I) and insert end ‘b’ into Top Rail tube, then put end ‘a’ of spring into trampoline Jumping
Mat(A) rings.
• Hold Spring Tool (J) overhand and pull spring hook towards Top rail as picture shown; drop hook into
frame hole until it latches on completely, tap it down if hook is not completely in the hole.
Please be careful where you place your hands and other parts of your body during spring assembly
as connector points become pinch points!
STEP 2
To Next Page
Loading...