EasyManua.ls Logo

Visa Lighting Sole Series - Important Safety Instructions

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this illuminated mirror.
WARNING:
* To reduce the risk of burns, fire, electric shock, or injury to persons:
* When using an electrical furnishing, basic precautions should always be followed, including
the following:
*Use this illuminated mirror for its intended use as described in these instructions. Do not
use attachments not recommended by the manufacturer.
WARNING:
* Risk of Death or Serious Injury
* Do not install near pools, ponds, or other bodies of water.
SAVE THESE INSTRUCTIONS
WARNING
:
To reduce risk of Ligature:
* Ensure all fasteners are fully seated and do not protrude from the mirror frame.
* Apply a pickproof sealant around the perimeter of the frame in the slight gap
between the frame and mounting substrate.
Drawing:
762277XX
Rev:
F
Sheet:
2 of 9
Eng:
CG2
Date Drawn:
10/27/19
INSTALLATION INSTRUCTIONS
Model:
CB1850, CB1852
Fixture Family:
SOLE
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
Make sure all connections are in accordance with the National Electrical Code and local regulations.
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
Service should be performed by qualified personnel.
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
Document Description: Installation Instructions for
Sole Series Mirrors