EasyManua.ls Logo

VISA SN-9100 - Cancellation Procedures; Codes of Tv; 4.2.A) Cancellation of Only One Button; 4.2.B) Total Cancellation (on All Buttons of both Memory Banks)

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
tion again repeat from b).
To learn a new command on a button that has
already been memorized it is necessary to
first clear the memory (4.2)
4.2) Cancellation procedures.
Cancellation procedures are used when wan-
ting to replace a learned command with
another learned command or restore a pre-
programmed command (See NOTE above).
4.2.A) Cancellation of only one button.
a) Press and release the « » button.
b) Enter the code «6 6 6 6».
c) Press the button to be cleared and watch the
LED that will confirm cancellation with 2
short flashes.
d) To cancel more commands repeat from a).
N.B.: Exit from cancellation mode is automatic
after approx.
8 seconds of the last operation.
4.2.B)Total cancellation (on all buttons of both
memory banks).
a) Press and release the « » button.
b) Enter the code «7 7 7 7» and watch the LED
that will confirm cancellation with two
short flashes.
5) “WHAT TO DO IF…”
- After the batteries have been inserted, the
LED will not flash when pressing the
« » button?
Check that the batteries have been inserted with
correct polarity.
- The automatic search was unsuccessful?
Repeat the operation and observe the LED
After a while you will notice that the LED emits 5
short flashes indicating the end of a search cycle.
Keep the search button pressed…if your
machine still does not respond and the LED
again emits 5 short flashes, abandon this proce-
dure and try inserting manually, one by
one, following the procedures in the pre-
vious chapters, all the codes listed in the
tables (Tab. A for TVs,Tab.C. for VCRs).
- You have some difficulties with the learning
function?
Try repositioning the two remote controls chan-
ging the distance and/or alignment.
- After a while the operation of the remote
control becomes erratic?
Make a note of the codes memorized (see also
para.
3
) and quickly change the batteries. If no
change,press (for example with the tip of a pen-
cil or non sharp object) the internal reset button.
Take notice: after pressing the RESET but-
ton it is necessary to enter again all the requi-
red codes.
CODE
?
CODE
?
CODE
?
4
SONY
1001 - 1002 - 1003 - 1004
1005 - 1006 - 1007 - 1008
PANASONIC
1009 - 1010 - 1011 - 1012
1013
SAMSUNG
1014 - 1015 - 1016 - 1017
1018 - 1019 - 1020 - 1021
1022 - 1023 - 1023 - 1024
1025 - 1026 - 1027 - 1028
TAB. A: CODES OF TV
TAB. B
ORIGINAL SONY MODELS CODE
1 465 487 11 - 1 465 488 11 - A 1009801 A - A 1009840 A - A 1009866 A - A 1009875 A - A 1470708 A - A 1470716 A -
1001
A 1470726 A - A 1470735 A - A 1470738 A - A 1470742 A - A 1470744 A - A 1470745 A - A 1470747 A - A 1470760 A -
A 1470779 A - A 1470791 A - A 1470794 A - A 1470806 A - A 1470808 A - A 1470811 A - A 1470813 A - A 1470816 A -
A 1470818 A - A 1470839 A - A 1470844 A - A 1470858 A - A 1470876 A - RM (VIDEO 8) - RM 640 - RM 641 A -
RM 642 A - RM 644 - RM 646 - RM 649 - RM 650 - RM 651 - RM 652 - RM 653 - RM 654 - RM 655 - RM 657 -
RM 658 - RM 661 - RM 661 A - RM 662 - RM 663 - RM 664 - RM 665 - RM 668 - RM 670 - RM 671 - RM 672 -
RM 673 - RM 674 -RM 676 - RM 677 A - RM 687 - RM 687 B - RM 827 B - RM 849 T
1465 13411 - 1465 136311 - 1465 79611 - 1465 79621 - 1465 79711 - 1693 14122 - 9196 345 0 - A 1470681 A - 1002
A 1470704 A - A 1470712 A - A 1470727 A - A 1470728 A - A 1470741 A - A 1470802 A - A 1470847 A - A 1470859 A -
A 1470881 A - RM 669 - RM 677 C - RM 688 - RM 689 - RM 694 - RM 698 - RM 717 A - RM 724 - RM 816 - RM 817 -
RM 818 - RM 821 - RM 826 - RM 827 S - RM 828 - RM 845 T - RM 849 S - RMK 1T
RM 637 C - RM 830 - RM 831 - RM 832 - RM 833 - RM 834 - RM 836 - RM 838 - RM 839 - RM 842 - RM 846 - 1003
RM 860 - RM 862 - RM 863 - RMV 242
A 1009093 A - A 1009094 A - A 1009098 A - A 1009194 A - A 1009604 A - A 1009614 A - A 1009756 A - A 1009765 A -
1004
A 1470562 A - A 1470588 A - A 1470591 A - A 1470594 A - A 1470615 A - A 1470625 A - A 1470631 A - A 1470634 A -
A 1470640 A - A 1470648 A - A 1470672 A - A 1470759 A - RM 105 - RM 610 -
RM 611 - RM 613 - RM 613 S -
RM 613 ST - RM 614 - RM 615 P - RM 620 - RM 621 - RM 622 - RM 623 - RM 624 - RM 625 - RM 630 - RM 631 -
RM 632 - RM 633 - RM 634 - RM 635 - RM 636 - RM 637 - RMT 211 - X 43578551 - X 43716151
N.E. SN 9100 (GB) 13-07-2000 12:33 Pagina 4

Related product manuals