User instruction
7
User instructions
CAUTION: ALWAYS USE CAUTION WHEN HANDLING THE FOOT SPA. DO NOT
DROP THE FOOT SPA.
1. The foot spa must be placed on a firm, level surface.
2. Ensure that the foot spa is unplugged before filling. DO NOT use the foot spa
without water.
3. Fill the foot spa with approximately 11-12 cups of warm water. DO NOT exceed
the maximum fill line. NOTE: The foot spa will not be able to heat cold water.
You must fill with warm water first.
4. Plug the power supply cord into an electrical outlet. Be sure plug fits tightly in
outlet.
5. Sit down and then place your feet in the foot spa basin.
6. Turn the control knob to the desired setting.
a) 0 – Off
b) 1 – Bubbles
c) 2 – Heat (will keep water warm up to 115°F)
d) 3 – Bubbles & Heat
7. Enjoy the deep penetrating massage while moving your feet forwards and
backwards over the dual massaging rollers and the textured bottom of the
basin.
NOTE: When finished with foot spa, dry feet thoroughly before walking.
Dual Foot
Massaging
Rollers
Rollers
Control knob with 3
settings and Off
To Next Page
Loading...