Need help?Do you have a question about the Viscount Jubilate 245 and is the answer not in the manual?
General| Brand | Viscount |
|---|---|
| Model | Jubilate 245 |
| Category | Musical Instrument |
| Language | English |
Selects one of six memory banks for general and particular memories.
Shifts instrument tuning by semitones for easier playing and accompaniment.
Selects historical temperaments for authentic ancient music recreation.
Powers the Jubilate organ on or off; unplug during thunderstorms.
Contains drawstops for the pedal board and couplers for manuals to the pedal.
Contains drawstops for the first manual, Tremulant and MIDI controls.
Contains tabs for the second manual, Tremulant and MIDI controls.
Controls MIDI transmission and reception for Program Change, Control Change, SysEx.
Connects manuals and pedals, allowing voices to play on multiple sections.
Controls the overall volume of the organ.
Adjusts the volume of the first manual.
Controls the amount of reverb to enhance the sound.
Adjusts the volume of the pedal board.
Selects one of 16 Tremolo effects for amplitude and modulation.
Contains tabs for the second manual and Tremulant.
Controls the overall volume of the organ for Jubilate 245.
Adjusts the volume of the first manual for Jubilate 245.
Adjusts the volume of the pedal board for Jubilate 245.
Shifts instrument tuning for easier playing.
Used for entering MIDI channel numbers or sending Program Changes.
Activates the memory function for storing register selections.
Stores register selections to memory (HR, 1-6).
Uses the swell pedal to control the volume of the whole organ.
Produces tubular bell sounds on the second manual, muting other registers.
Activates preset registers for a fuller 'Great Organ' sound.
Turns off all registers on the organ.
Stores specific register combinations for each manual and pedal board.
Controls Man.II volume; can control whole organ if 'ENC' is active.
Controls volume for the first manual and the pedalboard simultaneously.
Controls the volume of the second manual; can control whole organ if 'ENC' is on.
Used to switch on couplers as described in chapter 2.
Produces the 'Great Organ' or 'TUTTI' sound, activating all registers.
Provides +12 Volt tension, typically for remote functions.
Connects the organ to other MIDI devices like computers or sequencers.
Inverts registers between Man.I and Man.II.
Transmits Program Change data to external MIDI devices.
Activates one of 8 classical demo sequences stored in memory.
Recalls pedalboard memory when GREAT manual memory is recalled.
Resets the instrument by pressing HR, 1, 2 and switching on the organ.
Disables internal sound generation for MIDI piloting of external units.
To Next Page