Do you have a question about the Viscount Concerto III and is the answer not in the manual?
Brand | Viscount |
---|---|
Model | Concerto III |
Category | Musical Instrument |
Language | English |
Guidance on handling and maintaining the organ's physical condition.
Recommendations for using and caring for floppy disks with the organ.
Information regarding the manual's content, copyright, and usage.
Description of controls and connections located on the organ's side panels.
Overview of the central control panel and its various components.
Details of the controls and pistons associated with the pedal board.
Explanation of audio and MIDI connectors located below the manuals.
Description of the output and power connectors on the rear of the instrument.
Procedure for loading new organ voices from a floppy disk.
How to rearrange loaded organ voices according to a standard order.
Adjusting the volume levels for individual organ voices.
Verifying and changing labels on the organ stops after loading voices.
Explanations of common error messages encountered in the voices menu.
How to view the files and folders present on a floppy disk.
Instructions for preparing a floppy disk for use by the organ.
Procedure for backing up organ configurations to a floppy disk.
How to restore organ configurations from a floppy disk.
Adjusting the contrast of the organ's LCD display for better visibility.
Configuration of MIDI transmission and reception for organ sections.
Settings for keyboard inversion and audio output channel assignment.
Adjusting the speed and depth of the tremulant effect for each manual.
Choosing from different reverb effects to enhance the organ's sound.
Adjusting the tone of the organ sound using a graphic equalizer.
Guide on how to record musical performances using the organ's sequencer.
Instructions for playing recorded musical sequences.
Correcting rhythmic timing errors in recorded MIDI sequences.
Editing recorded MIDI sequences, including tempo and key changes.
Procedure for updating the organ's system and sound driver software.
Resetting the instrument to its original manufacturer settings.