EasyManua.ls Logo

Viscount Concerto III - The Manuals Splitter Controls

Viscount Concerto III
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
Viscount Concerto III - Operating Manual
12. [I/II KEYB. INVERS.] LED: LED displaying the I/II KEYBOARD INVERSION function,
which enables you to reverse the positions of Man.II and Man.I. (LED on). To set the function,
refer to point 6.4.
13. [II/P PIST. COMB.] LED: LED which displays the status of the PISTON COMBINE function.
When the function is enabled (LED on), if a memory dedicated to the second manual is activated,
the same memory dedicated to the pedal board will automatically be recalled.
For activation of this function, refer to point 6.2.
14. [COUPLERS] section: using these stops, you can enable (stop on) or disable (stop off) the
couplings between the manuals and the pedal board, as follows:
o [II/P]: the stops and Orchestra voices (in the version of the organ with Orchestra voices)
of the second manual will also play on the pedal board.
o [III/P]: the stops and Orchestra voices of the third manual will also play on the pedal
board.
o [I/P]: the stops and Orchestra voices of the first manual will also play on the pedal
board.
o [III/II]: the stops and Orchestra voices of the third manual will also play on the second
manual.
o [I/II]: the stops and Orchestra voices of the first manual will also play on the second
manual.
o [III/I]: the stops and Orchestra voices of the third manual will also play on the first
manual.
2.3 THE MANUAL SPLITTER CONTROLS
15
16a
17
18c 16c 16d
18a
18b25
16b
20
19
21
22
23
24
15. General memories: this section contains the instrument’s six general memories. You can use
the general memory to save the stops, the Couplers and the Orchestra voices (in the version of
the organ with Orchestra voices) of all the manuals and the pedal board.
16. Dedicated memories: the Concerto III also has six memories dedicated to the pedal board
(16a), to Man.III (16b), to Man.II (16c) and to Man.I (16d). In the dedicated memories you can
only save the setup of the stops, the couplers and the Orchestra voices (in the version of the
organ with Orchestra voices) of the section associated to the memory selected.
In actual fact, the organ has 48 general memories and 48 dedicated memories for each manual
and for the pedal board, since there are eight memory banks which can be selected on the

Table of Contents

Related product manuals