VIVA Series - Digital Piano
32
IMPORTANT NOTE
Every modification done in editing mode is immediately active and
the values in editing are sent to the MIDI port and to the MIDI
channel of the layer. This to make every modification immediately
“audible”.
All the modifications done in the Edit mode remain in memory. This
means that, once selected one function, it is not needed to store it
immediately. It is possible to make a set of editing and store
everything at the end (e.g. also change the editing layer with the
[LAYER SELECTION] keys) and save everything at the end of the
edit session.
Please note that, if the performance is changed without saving, all
modification done will be lost.
TUNE FUNCTION
The keyboard is tuned at A=440 Hz. If we need to change the
tuning, press EDIT key until the word TUN is displayed. Leaving the
key, the distance value of the tuning from the 440 Hz value is
displayed in Cents (0=tuned).
Rotate the encoder clockwise (pitch increased) or counterclockwise
(pitch decreased) to get the desired tuning. Press STORE to select
and store. The tuning value is a system value, therefore valid of all
timbres and performances.
To Next Page
Loading...
Need help?
General
