VISICAM TC 20 User Manual (English)

To Next Page

VWR_Quick_Guide_VisicamTC20_Feb15_rev0.docx

1 / 4

Tablet Camera VisiCam TC 20

ECN# 630-2589

INSTALLATION QUICK GUIDE

Box contains:

1 10’’ Tablet

1 CMOS Camera with WiFi module

1 Connection bifurcate cable (connects camera to wifi module)

1 Power supply (9Volt) for WiFi module, with plugs

1 Power supply (5Volt) for Tablet with USB cable, with plugs

1 Tiltable support for Tablet

1 User manual, 1 Quick guide

Remove all the parts from the package and check if any visible damage has occured

1. SWITCH-ON OF VISICAM TC20 TABLET CAMERA

Follow the instructions in the order as described below.

ATTENTION: before doing the connections, be sure that the Tablet is switched off

WiFi module

Camera

Need help?

Do you have a question about the VISICAM TC 20 and is the answer not in the manual?

VISICAM TC 20 Specifications

General

Connect the bifurcate cable to the camera and the WiFi module for system setup.

Connect 9V power to WiFi module and 5V power to the tablet.

Connect the tablet to the camera's WiFi network to establish communication.

Overview of the standard Android navigation buttons: Back, Home, and Open Applications.

Details the login process for the Tabkam View application, including user selection.

Instructions on how to preview and capture images using the camera.

Steps to safely power down the Visicam TC20 tablet camera system.