VISIO OLED55-H1 - OLED Protection, Timers, and PIN Settings

3
OLED Panel
Adjust screen protection settings that prevent screen burn in.
To set the OLED Panel features:
Menu > System > OLED Panel
The two options for this feature are:
• Screen Refresher — Corrects picture dimness that may result after the TV has
been powered on for an extended period of time.
• Pixel Shift — Shifts the screen slightly to prevent screen burn.
TIP: This OLED TV has a built-in Screen Protection Mode to prevent
image sticking. If the same image is on the screen for one minute
the screen will dim. If more than 10 minutes, the screen will turn o,
but the Power Indicator light will still be on. Press any button on the
remote to go back to the normal screen. The TV will power down if
left in Screen Protection Mode for another 60 minutes.
Using the USB Power Feature
The USB port can be used to charge devices.
To set the USB Power feature:
Menu > System > USB Power
The two options for this feature are:
• Always On — Power is always available.
• O When TV O — Power is only available
with the TV is on.
USB Power
Always On
Off When TV Off
Turning the Power Indicator On or O
The power indicator on the front of your TV normally does not glow when the TV is
on. You can change this setting if you prefer the light to be on.
To turn the Power Indicator Light On or O:
Menu > System > Power Indicator > O/On
Setting Timers
When activated, the TV’s timer will turn the TV
off after a set period of time.
To setup a sleep timer:
Menu > System > Timers
Use the Left/Right Navigation buttons on
the remote to highlight the period of time after
which you want the TV to go to sleep: 30, 60,
90, 120, or 180 minutes. If you don’t want the
sleep timer to activate, change the setting
to Off.
Timer
Sleep Timer
Auto Power Off
Blank Screen
Off
10 Minutes
Setting the Auto Power O Feature
To help save energy, your TV is set by default to turn off after 10 minutes without a
video or audio signal. This feature can be deactivated.
To set the Auto Power O feature:
Menu > System > Timers > Auto Power O > O
Using the Blank Screen Feature
To help save LED life, your TV screen can turn on or off while audio is streaming.
To use the Blank Screen feature:
Menu > System > Timers > Blank Screen
To exit Blank Screen, press any key (except the volume and mute keys).