Need help?Do you have a question about the Vision VISION-64 and is the answer not in the manual?
General| Brand | Vision |
|---|---|
| Model | VISION-64 |
| Category | Controller |
| Language | English |
Explains zone types, fault conditions, and bypass options.
Details partitioning the system into areas and arming states (All On, Part On).
Describes the function of each button on the Vision Graphic keypad for user input and navigation.
Explains the meaning of various icons and LEDs displayed on the keypad for system status.
Explains the different tones emitted by the keypad to signal system events like alarms and trouble conditions.
Instructions for turning areas All On, Part On, and turning the system off.
How to silence alarms and clear alarm memory from the system.
Explanation of how the system can automatically arm itself and how to delay it.
How to arm the system remotely using a touch-tone telephone.
Procedure for changing the user's personal identification number (PIN).
How to input text using the keypad, including character assignment and navigation.
How a master user can change another user's PIN.
Procedure for a master user to delete another user's PIN.
How a master user can assign a PIN to a new user.
Instructions for adding, checking status, and deleting token cards for access.
Procedure for programming the user's RF keyfob ID number.
How to program a name for each user, up to 16 characters.
How to grant access to specific system areas for each user.
Explains how timer groups restrict user access based on schedules and time periods.
How to remove an assigned RF keyfob ID from a user.
How to assign users to access groups to control access to system outputs like doors.
How to view the current status (armed/disarmed) of individual system areas.
How to individually arm or disarm a specific system area.
Instructions for turning all assigned areas on or off simultaneously.
How to switch the keypad's context to control a different area in a partitioned system.
How to enable or disable chime mode for monitoring zones when an area is disarmed.
How to program a custom name for each system area, up to 16 characters.
How to view the current status (Normal, Open, Short) of individual zones.
Procedure for disabling or enabling zones to prevent them from triggering alarms.
How to program which zones trigger chime alerts when an area is disarmed.
How to define zones monitored specifically for Part 2 arming state.
How to assign custom names to zones for easier identification.
How to simultaneously test all zones within an area by triggering them.
How to test a specific zone individually for proper function.
Procedure to reset smoke detectors after an event or maintenance.
How to check the current operational status of system outputs.
Instructions for turning programmed outputs on or off.
How to assign custom names to system outputs for better identification.
Procedures for testing external and internal sirens connected to the system.
How to test the functionality of the system's strobe light.
How to use the Call/Answer RAS feature to connect to the installer's computer.
How to manage call forwarding features for incoming calls.
How to program personal phone numbers for reporting and call forwarding.
How to set specific numbers for automatic call forwarding when arming/disarming.
How to manually initiate a test report to the monitoring station.
How to view the operational status, voltage, and assignment of keypads.
Overview of status checks for RF, Serial, X10, LAN, GSM, Ethernet, and Access modules.
How to set the volume level for the keypad's buzzer.
How to modify the contrast of the keypad's LCD screen.
How to control the brightness of the keypad's LCD backlight.
How to view panel software version and current system troubles.
How to interpret system trouble events and identify their causes.
How to view the last 256 recorded system events, including source and description.
How to program and adjust the system's date and time settings.
How to assign custom names to schedules for easier reference.
How to set which days of the week a schedule operates.
How to define the start and stop times for each programmed schedule.
How to assign custom names to holiday periods for system configuration.
How to program the start and stop dates for holiday periods.
How to test all zones within an area simultaneously.
How to set minimum/maximum temperatures for keypad monitoring.
How to manually test the system's backup battery voltage.
To Next Page