9
Loading the Batteries
The Visioneer LX 200 uses 2x AA LR6 batteries.
Loading the Batteries:
1. Locate the Battery & Memory Card Door on the
bottom of the camera.
2. Slide the button on the Battery & Memory Card
Door towards the center of the camera. (fig.1.1)
3. Lift the Battery & Memory Card Door to open.
4. Insert the batteries with the positive terminal
toward the + sign, and the negative terminal
toward the – sign. (fig.1.2)
5. Close the Battery & Memory Card Door.
Note: Remove the batteries from the Visioneer LX 200 if the camera
will not be used for an extended period of time to prevent corrosion
or battery leaks.
Checking the Batteries
The camera has a battery indicator that shows the current battery level.
FULL
Batteries are full
and ready to use.
LOW
Batteries are low
and need to be
replaced soon.
fig.1.1
fig.1.2
To Next Page
Loading...
Need help?
General