Visionis VIS-7001 User Manual

VIS-7001
ref.
Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
sales@visionistech.com
INSTALLATION MANUAL
Indoor + Outdoor Weather and Waterproof
Rated IP65 Stainless Steel Door Bell Type
Round Request To Exit Button Standard Size
For Door Access Control With LED Light +
NC COM and NO Outputs
Rear ViewFront View
19mm
(0.74in.)
19mm
(0.74in.)
70mm (2.75in.)
Technology Within Your Reach
115mm
(4.52in.)
83mm
(3.26in.)
40mm
(1.57in.)

Visionis VIS-7001 Specifications

General

Operating Voltage	12 VDC
Material	ABS Plastic
Category	Accessories
Model	VIS-7001
Brand	Visionis

Summary

INSTALLATION MANUAL

Front View

Displays the front appearance of the exit button, including the PRESS TO EXIT label and branding.

Rear View

Shows the rear of the exit button with wiring labels, connection diagram, and manufacturing details.

Exit Button Wiring Diagram

Wiring Connections

Outlines the specific wire color-to-function mapping for the exit button's COM, NC, NO, power, and ground.

Operational Specifications

Details push-button dry contact ratings, connection requirements (NO/NC), and LED power supply voltage.