Visonic GSD-442 PG2 Specification

GSD-442 PG2
PowerG Wireless Carbon
Monoxide (CO) Detector
•
Gives early warning of carbon monoxide (CO)
poisoning danger, providing visual and audial
alarm indications when CO is detected
•
Loud built-in alarm buzzer (95db) and a
largeashingLED
•
Continuous auto-testing and manual testing
•
Easywallorceilinginstallation(with
bracket); no need for cabling work
•
Simple battery replacement
•
Back tamper
•
PowerG two-way Frequency Hopping Spread
Spectrum FHSS-TDMA technology - provides
robustness and reliability closer than ever to
wired
•
Large transmission range enabling repeater-
free installations
•
Visible link quality indication shown on the
device
•
Compatible with PowerMaster systems and
PowerG receivers
•
Fullycertiedbythemoststrictand
demanding international standards for
safetyproductsinEurope(LPCBUK,
EN50291)andUSA(UL2075)
Specications:
Battery type: 9V lithium battery
or alkaline battery,
Weight
(including battery):
180g (6.35oz)
Operating
temperature:
0°C to 40°C
(32°F to 104°F)
Operating
environment:
Indoor
Dimensions: 127 x 40mm
(5 x 1.6in.)
GSD-442PG2isawirelessCOdetector
that gives early warning of CO
poisoning danger, preventing damage
to vital organs and even death. When
CO is detected, GSD-442PG2sends
alerts to the PowerMaster control
panel. A central station or private
numberisthenimmediatelynotied.
This enables a rapid and effective
response to the emergency.

Visonic GSD-442 PG2 Specifications

Operating Environment

operating temperature	0°C to 40°C
operating environment	Indoor

Battery

battery type	9V lithium battery or alkaline battery

Weight and Dimensions

weight	180 g
dimensions	127 x 40 mm