MENUS AND FUNCTIONS
D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 27
C. User Setting Options Menu
Click the button until the display reads the desired setting option and then press the
button.
Use to set the Zone Bypass Scheme i.e. to bypass (exclude) faulty or
unsecured ("disturbed") zones, or to clear a bypassed zone (unbypass). For
further details and programming procedure see section C.1.
3
Use to quickly review the Bypass Scheme i.e. which zones are bypassed. For
further details and reviewing procedure see section C.2.
3
Use to Recall the last used bypassed scheme for reuse in next arming period.
For further details and recalling procedure see section C.3.
3
Use to program your Master User secret access code and the seven codes of
the other users. For further details and programming procedure see section
C.4.
Use to add new Proximity Tags to or to delete Proximity Tags when lost. For
further details and programming procedure see section C.5.
Use to add new Keyfob Transmitters or to delete Keyfob Transmitters when
lost. For further details and programming procedure see section C.6.
Use to set the time clock to show the correct time and time format. For further
details and programming procedure see section C.7.
Use to set the calendar date to show the correct date and date format. For
further details and programming procedure see section C.8.
Use to enable or disable the Automatic Daily Arming option at predefined
times (see Auto-Arm Time setting). For further details and programming
procedure see section C.9.
Use to set the predetermined time for the Automatic Daily Arming if enabled
(see Auto-Arm Enable setting). For further details and programming
procedure see section C.10.
Use to program the four private telephone numbers for reporting alarm and
other event messages to private subscribers. For further details and
programming procedure see section C.11.
Use to enable or disable the squawk sound i.e. arm / disarm feedback
indication. For further details and programming procedure see section C.12.
Use to set the daily / weekly time schedule for start & stop activation of
devices connected to the PGM output. For further details and programming
procedure see section C.13.
Use to enable or disable the voice option i.e. the voice prompts that are heard
over the built-in loudspeaker. For further details and programming procedure
see section C.14.
Returns to
first option
Use to exit from the “USER SETTINGS” menu back to Main Menu. For further
details see section B.3.
To Next Page
Loading...
