Visonic POWERMASTER 10 - Page 32

MENUS AND FUNCTIONS
D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 31
Additional Information (section C.1 – C.3)
1
For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.
2
a. The STATUS to the right of the zone number indicates whether the zone is READY, NOT-READY or
BYPASSED.
b. In the example on the left the display reads [ Z01: READY ] alternating with [ Living Room ].
3
a. If the zone you selected is "not bypassed", the display prompts you to press [ <OK> TO BYPASS ].
However, if the zone you selected is already "bypassed", the display prompts you to press [ <OFF> TO
CLEAR
].
b. To abort and return to the previous step press or
4
The display now prompts you to press [ <OK> TO RECALL ] i.e. to repeat the last used bypass scheme. If
you wish to abort and return to the User Setting menu, press
.
5
You can now repeat steps 2 - 5 to bypass or clear another zone. To end this session and to select other
menu options or to quit programming - follow the instructions in section B.2.
6
You can now select another option in the User Setting menu (see section B.1), or quit programming (see
section B.2).