MENUS AND FUNCTIONS
D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 51
C.14 Enabling / Disabling Voice Option
∗
∗∗
∗
The system allows you to enable or disable Status-dependent, pre-recorded verbal messages that are heard
over the built-in loudspeaker.
♦ Here you can enable / disable the Voice Option.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
1.
Enter the USER SETTINGS menu, select the [VOICE OPTION] option and
press the button to confirm.
1
2.
The display shows the currently selected setting.
2
or Click the or button until the display reads the desired
setting, for example, "disable prompts" and press to confirm.
3
3.
☺ Return to step 1
A "Happy Tune" ☺ sounds. The display confirms the saved setting, then
returns to step 1.
4, 5
Additional Information (section C.14)
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
a. The display shows the currently selected setting (indicated by a
symbol), for example, "
enable
prompts
".
b. You can now enable (voice prompts) or disable (no voice prompts) the voice option using the
or button.
3
The
symbol now appears next to the newly selected option.
4
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
5
If you have selected "
enable prompts
", make sure that the voice prompts can be heard over the
loudspeaker by pressing the key on the control panel keypad.
∗
Refers to PowerMaster-30 with voice option only
To Next Page
Loading...
