APPENDIX A. PARTITIONING
D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 63
Arming Station PG2
The Arming Station PG2 virtual keypad is used to control a partition / partitions.
Arming/Disarming Partitions
∗
∗∗
∗
Note: Before using Partitioning, make sure it is enabled in the control panel (see PowerMaster-30 Installer
Guide).
To arm/disarm partitions, press the desired partition number/s (
/ / ) then perform the arming
action by pressing the (HOME) / (AWAY) / (DISARM) button within a timeout period and then
present the proximity tag.
∗
Refers to PowerMaster-30 only
To Next Page
Loading...
