14 D-303983 PowerMaxComplete Installer's Guide
Figure 4.2 - Enrolling / Deleting Wireless Devices / Keyfobs / Wireless Commanders / Wireless Sirens
* Keyfob & proximity tags enrolling can be performed by
the installer or by the user (via USER SETTINGS
menu).
** A black box in the display means that a device is
enrolled (the system has learned its ID). No black box
indicates that the device is not enrolled.
*** Initiate either normal transmission or the device tamper
function (see ENROLLING TYPE, Par. 4.2.2).
****Select "higher" sensitivity for far wireless device,
"lower" for near devices.
Note: This changes the RF range during enrolling only
and does not affect the performance of the sensor.
To Next Page
Loading...
Need help?
General
