6
Invisible 8
90°
A
1/2019 (EN)
EN
Instructions of use
The Invisible accessories/shelves are inserted in to
the holders or profile at a slight angle until the limit
stop is reached.
Then lower the accessory/shelf.
Check that the accessory is correctly clicked into the
profile.
Max. load
Profile
per mm kg
Front arms Ømm kg
Bracket for hanging rail Ø per bracket kg
Bracket for wooden shelf per bracket kg
Bracket per bracket kg
Universal lug for wooden back panel per lug kg
Fixing set per fixing set kg
Glass shelf mm with cutouts (-) kg
Glass shelf mm (-) kg
Careful handling with accessories for Invisible
Lift the support arm slightly and insert it into
profile at a ° angle until you reach limit stop
»A«.
Release the support arm and check that it is
correctly secured. Do not try to force it to the left
or right.
Universal bracket for Invisible
Lift the universal bracket slightly and insert it
into profile at a ° angle until you reach the
limit stop.
Fix the universal bracket into place with the
locking lever. Check that it is correctly secured.
Weight loading
The indicated weight loads are always based on the total weights of the merchandise support and goods.
Please observe that max. weight loading decreases as the merchandise support increases in length.
Please observe that the inclination of the merchandise support changes with an increase in load. Dierent weights on the merchandise
supports produce an uneven overall appearance of the goods display.
The max. weight loading of Invisible8 depends on the nature of the wall, on the number of fixation points as well as on the fixation material
used. All fixation points are to be used with a maximum weight load.
Please also observe the weight loads indicated in our sales documentation.
locked open
To Previous Page
Loading...