1. DISPLAY
Once initially powered on, the display screen is on full display for 3 seconds. The refrigerator default setting is medium, and the LED 3
indicator will be illuminated. This is normal operation display in case of a failure, the appropriate LED light will flash in sequence.
In case of no failures, the current temperature setting of the refrigerator will be on display.
2. TEMPERATURE SETTING
Each time the temperature setting is pressed once, the temperature setting changes one time.
After the temperature setting has been completed, the refrigerator will run according to the set value after 25s.
From left to right, the temperature is higher.
The order of coldness settings is as follows:
3. SETTING THE FREEZER TEMPERATURE
-
FUNCTIONS
14
Setting button
A. LED1 COLDEST indicator
B. LED2 indicator
C. LED3 indicator
D. LED4 indicator
E. LED5 COLD indicator
LED1 LED2 LED3 LED4 LED5
Assembly
The freezer temperature will be adjusted automatically according to the fridge temperature setting.
You do not need to adjust the freezer temperature manually.
A
C
B
D
E
To Next Page
Loading...
Need help?
General
