Vissani QR272S User Manual (English)

Questions and Answers:

S
Sydney DavisAug 4, 2025
Why is my Vissani QR272S Ventilation Hood not venting properly?
- J
  Jasmine ShafferAug 4, 2025
  Several factors can affect the venting performance of your Vissani Ventilation Hood. First, check for obstructions such as birds or animals nesting in the duct. Ensure the distance between the cooktop and the hood is within the recommended range. Verify the ductwork meets requirements: use 7-inch round metal ducts with a maximum length of 35 ft, minimize elbows, and properly seal all joints. Also, make sure the duct doesn't vent against the wind. For heavy cooking, use the high-speed setting and close nearby windows to prevent air gusts. Opening a window on the opposite side of the house can also improve venting.
D
Dawn SaundersAug 9, 2025
What to do if my Vissani Ventilation Hood fan seems weak?
- J
  Jimmy LittleAug 9, 2025
  If the fan in your Vissani Ventilation Hood seems weak, there are several things to check. First, ensure that the duct size is at least 7 inches round, as insufficient duct size reduces efficiency. Next, inspect the duct for clogs and make sure any mesh on the wall cap isn't restricting airflow. Also, verify that the damper unit is opening correctly and that no birds or animals have nested in the duct.
T
Tina GutierrezAug 14, 2025
What to do if my Vissani QR272S Ventilation Hood fan is stuck?
- S
  Shannon FullerAug 14, 2025
  If the lights on your Vissani Ventilation Hood work but the fan is not spinning, stuck, or rattling, the thermal protection system might be shutting the motor down because it's too hot. In this case, the motor should function normally after the system cools down for about 10 minutes. Check that the fan isn’t jammed or scraping the bottom. If these steps don't resolve the issue, the motor may be defective and need replacement.
L
Leslie LoganAug 25, 2025
How to fix a Vissani QR272S that vibrates?
- R
  Rachel GomezAug 25, 2025
  If your Vissani Ventilation Hood vibrates when the fan is running, check that the hood is properly secured and tighten it if necessary. Also, ensure the motor is secured in place and tighten it if needed. Finally, inspect the fan for damage and replace it if damaged.
J
Joshua MorganAug 29, 2025
How to fix lights on a Vissani Ventilation Hood?
- C
  Corey HartAug 29, 2025
  If the lights on your Vissani Ventilation Hood aren't working, first check if the bulbs are damaged and replace them if necessary. Then, make sure the bulbs are not loose and tighten them. If the issue persists, remove the bulb and test the socket with a bulb that you know is working. If a properly functioning light does not come on, the problem may be the light assembly. Have the light assembly serviced or replaced.
B
Bruce MillerSep 10, 2025
How to troubleshoot a Vissani Ventilation Hood that doesn't turn on?
- C
  catherinepollardSep 12, 2025
  If your Vissani Ventilation Hood isn't operating, first, ensure the power supply cable and all electrical wiring are properly connected. Next, check that the power is turned on at the junction box or circuit breaker. Finally, verify that the wiring of the control switch is correctly connected.

Vissani QR272S Specifications

General

Brand	Vissani
Model	QR272S
Type	Under Cabinet
Airflow	200 CFM
Color	Stainless Steel
Material	Stainless Steel
Width	30 inches

Summary

Warranty

One Year Limited Warranty

Details the terms and duration of the limited warranty for the product.

Warranty Claim Procedure

Steps to follow and information required for making a warranty claim.

Pre-Installation

Tools and Materials Required

List of tools and materials needed for installation that are not included.

Package Contents

List of all items included in the product packaging.

Hardware Included

Details of the screws, connectors, and other hardware provided.

Planning Installation

Measures and considerations for planning the optimal placement of the hood.

Venting Options

Guidance on selecting and preparing for top or back venting methods.

Duct Work Installation Guidelines

Rules and recommendations for installing the ductwork system correctly.

Wiring Connection Requirements

Critical electrical wiring standards and procedures for safe installation.

Installation

Removing Electrical Knock-Out Hole

Instructions on how to remove the knock-out hole for electrical connections.

Removing Venting Hole

Guidance on removing the correct hole for the venting system connection.

Installing the Damper

Procedure for installing the damper unit into the range hood.

Installation Without Mounting Brackets

Steps for installing the range hood directly to the cabinet without brackets.

Frameless Cabinet Bracket Installation

Procedure for installing the range hood using brackets for frameless cabinets.

Framed Cabinet Bracket Installation

Procedure for installing the range hood using brackets for framed cabinets.

Securing the Range Hood to Brackets

Steps to securely attach the range hood to the installed mounting brackets.

Final Inspection

Checks and final steps after installation to ensure proper operation.

Operation

Turning Unit On and Off

How to operate the fan speeds and power switch for the range hood.

Turning Lights On and Off

Instructions on how to control the lighting of the range hood.

Maintenance

Replacing Hybrid Filter

Procedure for replacing the hybrid filters in the range hood.

Replacing Light Bulbs

Guide on how to safely remove and replace burnt-out light bulbs.

Care and Cleaning

Range Hood Care and Cleaning

Instructions for cleaning the exterior and interior of the range hood.

Filter Care and Cleaning

Guidance on how to clean and maintain the hybrid filters.

Troubleshooting

Range Hood Not Operating

Solutions for when the range hood fails to turn on or function.

Range Hood Vibrates

Troubleshooting steps for vibrations during fan operation.

Weak Fan Performance

Diagnosing and resolving issues with low fan suction or airflow.

Fan Not Spinning or Rattling

Solutions for when the fan is stuck, rattling, or not spinning.

Improper Venting

Troubleshooting common problems related to the venting system.

Lights Not Working

Steps to diagnose and fix issues with the range hood lights.

Specifications

Product Specifications

Technical details including model, dimensions, rating, CFM, and speeds.

External Diagram

Detailed dimensional drawings of the range hood's external structure.

Service Parts

Service Parts List

List of available replacement parts with their corresponding codes.

Related product manuals