0525 Hudson-Adela-Minto 11x11 Instructions V1.0 EN
Important
These instructions must be followed step by step.
Deviation from the instructions may void the product’s
warranty. See Warranty Sheet for further details.
Read all instructions thoroughly before starting assembly.
Use the component list as a checklist for product parts.
Unwrap parts only as needed to keep component dealer
code label intact for reference.
Assemble the structure on a rm, level surface. Protect
the product from damage as some pieces may be fragile.
If you require assistence, or need to order replacement
parts, contact your Visscher Dealer.
For additional information call the number below. Please
have the serial number ready to ensure quick service.
Before you begin
Site preparation
Two person project
Assistance
Product may be subject to building code requirements.
It is the consumer’s responsibility to inform themselves
of any restrictions prior to purchase.
Product can be heavy.
Use care when lifting.
Estimated assembly
time: 8 hours.
TOLL FREE 1 (877) 795-7423
To Next Page
Loading...