6.4 Cleaning
1) Clean pins of power plug with dried fabrics from time to time.
2) Keep local wastes handling regualtions when dispose wastes.
3) Clean edging unit with soft brush and clean water after operation.
Be careful the water is not be soaked or penetrated into machine inside.
4) Take dusts off from the accessories after operation.
5) When outside panels or the surface of machine became dirty ,
clean dirty part with soft fabrics with neutral detergent.
Don't use organic chemistry detergents like solvent at all.
6) Cover the machine well to prevnet from live small-sized animals like rats.
To Next Page
Loading...