Visslo F8 premier - Chapter 4. Edging; 4.1 Standard edging(Beveling)

4.1 Standard edging(Beveling)
4.1.1 Automatic edging
1) Choose edging conditions
: otherwise
:
2) Fix the lens to adaptor
Push leap cup and push and
fix the lens, as keeping the standard point of leapcup
to the standard point of adaptor.
Fig.14 Fixing lens
Note) Edge the lens after keeping the standard points always
,otherwise precise edging may not be able to be made.
Chapter 4. Edging
Standard point
Leap cup
( block)
Base point
Adapter for half-eye
Standard
Leap cup
Leap cup for half-eye lens
Base point