Need help?Do you have a question about the Vista VIPER HDA and is the answer not in the manual?
General| USB Interface | 2 x USB 2.0 |
|---|---|
| Operating System | Embedded Linux |
| Channels | 4/8/16 |
| Compression | H.264 |
| Video Input | 4/8/16 channels |
| Video Output | HDMI, VGA |
| Audio Input | 4/8/16 channels |
| Audio Output | 1 channel |
| Recording Resolution | 1080p, 720p |
| Storage | Supports up to 6TB HDD |
| Network Interface | RJ45 |
| Hard Drive Capacity | Supports up to 6TB HDD |
| Remote Viewing | Yes, via mobile app and web browser |
| Motion Detection | Yes |
Specifies the designated purpose for using the product.
Provides contact information for technical assistance and sales.
Explains formatting, warnings, cautions, and symbols used in the manual.
Details critical warnings, cautions, and notes for safe operation.
Covers CE and RoHS compliance for product standards.
Lists essential safety precautions for operating the apparatus.
Informs about potential radio interference in domestic environments.
Warns about explosion risk if battery is replaced incorrectly.
Lists all components included in the device package.
Identifies and describes the front section components of the DVR.
Details the numbered ports on the rear of the 8-channel DVR.
Details the numbered ports on the rear of the 16-channel DVR.
Provides names and functions for each numbered DVR port.
Details how to connect external devices to the DVR's rear ports.
Instructions for logging into the DVR system using ID and Password.
Guides through setting up user accounts, ID, and password.
Configures system settings like language, device name, and resolution.
Sets up network parameters including IP address, subnet mask, and gateway.
Defines desired recording parameters for time and quality.
Configures system time, date, time zone, and daylight saving settings.
Explains the icons displayed on the live video screen.
Describes the functions available in the launcher menu at the bottom of the screen.
Details the options accessible via the quick menu.
Details the process of backing up video footage from the DVR.
Provides controls for PTZ camera functions like direction, zoom, and focus.
Displays system log information for monitoring and troubleshooting.
Shows event logs, allowing refresh and display of event lists.
Displays the recording status and record list.
Accesses system configuration options like language and time.
Configures individual camera settings.
Manages non-camera devices and HDD formatting.
Sets recording parameters and schedules.
Configures system events and actions.
Manages network connectivity and configurations.
Explains common buttons like Default, Save, Cancel, Restore, and Apply.
Sets basic system items like language, device name, and video type.
Applies new firmware to the DVR via USB.
Configures system date, time, holidays, and time zone.
Sets holiday dates for the system.
Manages user accounts, groups, and login settings.
Allows exporting or importing system settings via USB.
Resets device settings to factory default values.
Configures basic settings for individual cameras, like name and covert mode.
Allows copying camera settings to other channels.
Sets up audio input for cameras and recording options.
Adjusts video settings and configures privacy masks for cameras.
Configures display parameters like resolution and event popup duration.
Sets On Screen Display options for camera titles and icons.
Configures sequential display of camera feeds and dwell times.
Manages disk information, recording settings, and formatting options.
Configures iSCSI storage for the device.
Sets up PTZ camera control parameters like ID, protocol, and speed.
Configures serial communication for PTZ cameras and USB devices.
Configures PoS and text devices for DVR integration.
Allocates different recording types per hour for each day.
Sets image quality and resolution for the main video stream.
Sets image quality and resolution for the second video stream.
Configures recording parameters for the panic record mode.
Manages system events like restarts and disk events like full/unplugged.
Sets actions for hard-wired alarm inputs, including sensor types and camera assignment.
Schedules alarm input activation times for each day.
Configures motion detection parameters like sensitivity and area.
Schedules recording times based on motion detection.
Sets actions for video loss events, including alarms and notifications.
Configures periodical alarms and notification intervals.
Schedules periodic alarm notification times.
Configures WAN port settings for network connectivity.
Manages DVRNS/DDNS registration and dashboard setup.
Sets up DDNS for remote network access to devices.
Configures the email server for sending event notifications.
Searches recorded data using date and time parameters.
Searches recorded data based on event types and time.
Searches recorded data using thumbnail images.
Searches recorded data using keywords and text matching.
Allows playback of recorded video data and control of playback functions.
Details hardware and software requirements for webviewer access.
Provides steps for accessing and using the webviewer interface.
To Next Page
