EasyManua.ls Logo

VistaLab Ovation User Manual

VistaLab Ovation
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operators Guide for
Electronic Single Channel
and Macro Volume Pipettes
L065-0001-001 Rev. F
0.2-10mL
0.2-10mL
Question and Answer IconNeed help?

Do you have a question about the VistaLab Ovation and is the answer not in the manual?

VistaLab Ovation Specifications

General IconGeneral
BrandVistaLab
ModelOvation
CategoryLaboratory Equipment
LanguageEnglish

Summary

Product Description

Pipette Components

BioNatural Pipetting

Introduction to BioNatural Pipetting

Explains the ergonomic benefits of BioNatural pipetting.

Pipetting Posture Guidelines

Details recommended posture for ergonomic pipetting.

Comfort Zone for Pipetting

Defines and illustrates the recommended ergonomic comfort zone.

Pipetting Handling Techniques

Covers picking up, acquiring tips, and changing settings.

Ergonomic Aspirating and Dispensing

Describes ergonomic methods for aspirating, dispensing, and ejecting tips.

Using Macro Pipets with Serological Pipets

How to use macro models with serological/volumetric pipets.

Operating Procedures

Getting Started and Pipette Interface

Outlines initial setup and explains keypad/display functions.

Function and Setting Indicators

Explains the meaning of various display indicators.

Set-up of Liquid Handling Functions

Guide to setting up various liquid handling functions.

Pipette Functions and Dynamic Volume

Explains pre-set and dynamic volume pipetting functions.

Multiple Dispense Function

Details the function for repetitive dispensing of equal volumes.

Serial Dilute Function

Explains the function for performing sequential dilutions.

Mix Function

Describes the function for repetitive aspirating and dispensing cycles.

Reverse Pipette Function

Explains the sample transfer function for exact dispense volume (TD).

Pipette Settings Configuration

How to configure Tone, LCD contrast, and Pace settings.

Calibration

Introduction to Pipette Calibration

Explains factory calibration and in-lab calibration recommendations.

Determining and Setting New Calibration Factors

Guides on determining and setting new calibration factors.

Entering a Known Calibration Factor

How to enter a pre-determined calibration factor.

Calibration for Serological Pipets

Adjusting calibration for use with serological pipets.

Maintenance & Troubleshooting

Basic Maintenance: Cleaning and Disinfecting

Instructions for cleaning exterior and disinfecting nozzles.

Replacing Single Channel Nozzle

Steps for replacing the nozzle on single channel models.

Replacing Macro Nozzles

Steps for replacing nozzles on macro models.

Replacing Single Channel Nozzle Filter

Detailed steps for replacing the nozzle filter on single channel models.

Replacing Macro Nozzle Filter (100-5000µL)

How to replace nozzle filters on 100-5000µL macro models.

Replacing Macro Nozzle Insert (0.2-10mL)

Steps for replacing the nozzle insert on 0.2-10mL macro models.

Replacing Macro Nozzle Filter (0.2-10mL)

How to replace nozzle filters on 0.2-10mL macro models.

Battery Management

Information on battery recharging and replacement.

Troubleshooting Common Issues

Addresses common problems like blank display, alert sounds, slow operation.

Appendix A: Warranty, Safety, and Environment

Warranty and Safety Compliance

Details warranty terms, safety standards, and certifications.

Contact and Support Information

Provides contact details for assistance and service.

Hazards, Precautions, and Operating Conditions

Lists warnings, cautions, temperature, and environment specs.

Power Supply and Chemical Compatibility

Specs for power supply and chemical compatibility with pipette parts.

Appendix B: Tips and Accessories

Tips and Accessories Catalog

Catalog of available tips, nozzles, and accessories with part numbers.

Related product manuals