Vistec EBPG5200 - Page 23

15. APPENDIX A
Once the next message appears, press a key to see the ROM Messages:
┌──────────────────────────────────────────────────────────────────────────────┐
│ Press any key for Option ROM Messages │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────Screen0─┐
│ │
│ LSI Logic Corp. MPT SAS BIOS │
│ MPTBIOS-6.16.00.00 (2007.05.07) │
│ Copyright 2000-2005 LSI Logic Corp. │
│ │
│ Initializing... │
│ │
│Integrated RAID exeption detected: │
│ Volume (00:130) is currently in state INACTIVE/OPTIMAL │
│enter the LSI Logic Configuration Utility to investigate! │
│ │
│Press Ctrl-C to start LSI Logic Configuration Utility... │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
Thus press Ctrl-C.
Then Screen1 appears:
╔═════════════════════════════════════════════════════════════════════Screen1══╗
║ LSI Corp Config Utility V7.23.02.00 (2011.11.23) ║
║ Adapter List Global Properties ║
║ Adapter PCI PCI PCI PCI FW Revision Status Boot ║
║ Bus Dev Fnc Slot Order ║
║ LSISAS2308 02 00 00 01 12.00.02.00-IR Enabled 0 ║
║ ║
║ ║
║ ║
║ Esc = Exit Menu F1/Shift+1 = Help ║
║ Alt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List ║
╚══════════════════════════════════════════════════════════════════════════════╝
Press <enter> to get into the properties of SAS1068 controller.
Screen2 appears:
╔═════════════════════════════════════════════════════════════════════Screen2══╗
║ LSI Corp Config Utility v7.23.02.00 (2011.11.23) ║
║ Adapter Properties –- SAS2308-1 ║
║ ║
║ Adapter LSISAS2308 ║
║ PCI Slot 00 1 ║
║ PCI Address(Bus/Dev/) 02:00 ║
║ MPT Firmware Revision 12.00.02.00-IR ║
║ SAS Address 50014380:228513FB ║
║ NVDATA Version 0C.03.00.06 ║
║ Status Enabled ║
║ Boot Order 0 ║
║ Boot Support [Enabled BIOS & OS] ║
║ ║
║ RAID Properties ║
║ ║
║ SAS Topology ║
║ ║
║ Advanced Adapter Properties ║
║ ║
║ ║
║ Esc = Exit Menu F1/Shift+1 = Help ║
║ Enter = Select Item -/+ = Change Item ║
╚══════════════════════════════════════════════════════════════════════════════╝