VISTEON REGIO - Installation and Specifications; Work Instructions and Electrical Data

Infotainment System - REGIO
© 2019 Visteon Corporation Infotainment System www.visteon.com
d) Any warnings applicable to the installation and operation of the product and needed to protect
the safety and health of the users. See Page 1 of the EUM
e) Clear instructions about the installation and operation of the equipment.
1) Work instructions:
- Image 1: Radio connections are done (Radio = blue part = “Radiobedienteil” and
connectors / wiring hanrness = yellow part = Stecker Radio)
- Image 2: Radio is mounted (clipped) into the dash panel
- Image 3: after radio other plastic parts are mounted around the radio to cover the gaps.
Image 1 Image 2
Image 3
f) Especificaciones Electricas :
Supply voltage: 13,5V (Vcc)
Supply current: 5 A
Type of antenna: BT/WLAN Automotive Chip Antenna 2, 4/5 GHz
Frequency band: 2, 4/5 GHz
Antenna gain: 2, 4 GHz: -4 dBi / 5 GHz: 0 dBi
Paraguay:
Supplier Name : To be defined ( VW)
Address of the supplier in Paraguay: To be defined (VW)