VISTEON REGIO - Page 7

Infotainment System - REGIO
© 2019 Visteon Corporation Infotainment System www.visteon.com
the system, the system will
connect to the last
connected mobile phone.
c. Pairing a Phone
 Make sure Bluetooth has
been enabled on the cell
phone before the pairing
process is started.
 Touch the Phone icon on
the Home screen or the
media tab on the Settings
menu.
 Touch Add Device
 Select the Regio´s name
shown on the infotainment
display from your cell
phone’s Bluetooth Settings
list.
 Follow the instructions
on the cell phone to confirm
the six-digit code showing
on the infotainment display
and touch Pair. The code on
the cell phone and
infotainment display will
need to be acknowledged
for a successful pair.
 Start the pairing process
on the cell phone to be
paired to the vehicle. Once
the cell phone is paired, it
will show under Connected.
 If the vehicle name does
not appear on your cell
phone, there are a few ways
to start the pairing process
over:
- Turn the cell phone off and
then back on.
- Go back to the beginning of
the Phone menus on the
infotainment display and
restart the pairing process.
- Reset the cell phone, but
this step should be done as a
last effort
 Repeat above steps to
pair additional cell phones.
d. Paired Phones
 Touch Settings, then
touch Media.
 Touch Phones to access
all paired and all connected
cell phones and mobile
devices.
 Cell phones and mobile
devices can be added,
removed, connected, and
disconnected.
e. Phone
 Making a Call Using
Contacts and Recent Calls.
 Calls can be made
through the
Bluetooth system using
personal cell phone contact
information for all cell
phones that support the
Phone Book feature.
 The Contacts menu
accesses the phone book
stored in the cell phone.
 The Recents menu
accesses the recents call list
from your cell phone.